Plumbing problems are one of the most common issues that can happen on UK homeowners.
The good news is you can actually do the repairs by yourself from a slow draining sink to leaky pipes and low water pressure. You can get a drain cleaning kit from a place like B&Q.
To learn about this, check some easy fixes below and save your pocket of hundreds of pounds.
Do-It-Yourself Drain Cleaning Tips
Low water pressure
Low water pressure affects sink faucet and shower head. Check it first by removing the fixtures and examine the aerator. The common cause is the calcium deposits slowly build up. For an easy fix, make sure you carefully remove the aerator and try cleaning it by soaking the faucet or the shower head in a water-vinegar solution. Replace the device if it doesn’t work. After drain cleaning or replacing the device put it back on and turn on the water.
Slow Draining Tub
Another very common plumbing problem is a slow draining tub. However, this one can easily be fixed. A common issue with this is that the tub drain is full of hair. This is the reason why the water slows down as it drains out of the tub.
To clear out the debris in the drain, you can use a pair of needle-nose pliers as it is can easily reach in. In cases wherein your tub has a tub stopper in the drain, you have to remove it first before you get to remove the hair clog.
Leaky pipes are common to houses with an old plumbing system. The elements that can corrode pipes over time are oxygen, chlorine and hydrogen sulfide.
When you saw it, fix it fast by stopping the leak temporary or until you do a full repair. You can put an epoxy clay to the leaking area. Make sure the part is dry. Afterward, you cover it with a rubber and set it for an hour or more. After it has dried, use a water resistant tape for double protection.
In worse situations that would need a pipe replacement, you may call a professional plumber to do it.
Running toilet is one of the common plumbing problems that most people are familiar of. It can waste gallons of water a day and can cost you an increase in the water bill. Well, fixing it is easy but what you need to do first is to examine what causes the problem.
Flappers are usually the problem. If you examine and see that there is a mineral buildup, clean the flapper by soaking it in a bowl of water-vinegar solution for 30 minutes and scrub it with an old toothbrush.
Other things you can consider to do is to adjust the chain length just right and to adjust the water level to prevent draining of water constantly. Lastly is to test the fill valve by making sure that there is no running water in it. If there is, just adjust the float height as necessary.
Congested Garbage Disposal
A garbage disposal or a waste disposal unit. It is a device underneath that shreds food waste so it can pass through plumbing. However, putting anything that is too hard or too scratchy can cause blockages and congestion to the garbage disposal.
What you can do is to avoid putting items that are large and hard to shred. Moreover, you can also clean it by throwing some ice cubes from pure vinegar or lemon juice or a cleanser. This lets the waste to go down easier because the water pushes it down